|
|
| Part
Number |
Description |
$ Price |
| EMUL-ARM-STD |
The
EMUL-ARM-STD emulator consists of the Seehau Debugger
user interface, the USB1-JTAG hardware with 20-pin connector,
has basic run control, pre-configured FLASH programming,
CTM standard support and a getting started manual. Also includes the ImageCraft C-Compiler. |
$895.00 |
| Note:
For a 14-pin version append -14-PIN to the above part
numbers. |
 |
| EMUL-CTM-STD |
The
Nohau trace board that supports the 4, 8, or 16 bit embedded
trace macrocell (ETM). Provides 2 - 8 trigger levels dependent
upon the ETM configuration on the ARM based chip. This
is for previously purchased EMUL-ARMs or for customer
installation. |
$2,000.00 |
| EMUL-CTM-Nexus |
The
Nohau trace board that supports Nexus Level II and III
trace support. |
$3,000.00 |
 |
| ADP-MICTOR2JTAG |
The
ADP-Mictor2JTAG adapter allows the CTM to connect to a
plain 14-pin or 20-pin. |
$195.00 |
|
|
| EMUL-ARM/ADP-20PIN |
Alternate
cable assembly for connecting to a 20-pin target connector.
|
$25.00 |
| EMUL-ARM/ADP-14PIN |
Alternate
cable assembly for connecting to a 14-pin target connector.
|
$25.00 |
|
|
| Atmel/AT91EB40A |
CPU
AT91R40008 with 2Mbyte of Flash and 256Kbytes of SRAM
(internal to the CPU), Boot and Angel Debug Monitors,
Extension Slots, JTAG connector for EMUL-ARM, AT91-CDROM
including manuals and related documentation. |
$235.00 |
| Atmel/AT91EB55 |
CPU
AT91M55800A with 2Mbyte of Flash and 256Kbytes of SRAM
(internal to the CPU), Boot and Angel Debug Monitors,
Extension Slots, JTAG connector for EMUL-ARM, AT91-CDROM
including manuals and related documentation. |
$300.00 |
| OKI/ML674000 |
OKI
ML674000 32-bit MCU, 8KB of data memory, 1M of emulation
memory, 2MB external chip flash memory and 7-segment LED
indicator. |
$588.00 |
| OKI/ML67Q4003 |
OKI
ML67Q4003 MCU features ARM7TDMI 32-bit RISC CPU ARM mode
and 16-bit THUMB mode, 512KB built in Flash ROM, 32-Kbytes
built in zero-wait-state SRAM. |
$895.00 |
| EVAL/LPC2106 |
Philips
LPC2106 MCU, easy access to most I/O pins, prototyping
area, eight LEDs, three push buttons, two RS232 connectors
and a Mictor connector for the trace. |
$235.00 |
| EVAL/LPC3000 |
Philips
LPC9000 MCU, easy access to most I/O pins, prototyping
area, eight LEDs, three push buttons, many various I/O
connectors |
$995.00 |
| EVAL/LPC2800 |
Philips
LPC2800 MCU, easy access to most I/O pins, prototyping
area, User LEDs, push buttons, many various I/O connectors
|
$995.00 |
|
|
IAR
Systems Software, Inc.
C Compiler, Assembler, Linker |
|
| IAR/EWARM-
BL |
This
package contains an ANSI optimized C compiler, relocatable macro assembler, linker, librarian, complete ANSI
runtime libraries and a fully integrated development
environment under Win98/ME/NT4/2000/XP.
NOTE:
This package is ONLY available if you purchase the complete
EMUL-ARM-STD |
$2,995.00 |
| IAR/EWARM-LE |
This
package contains an ANSI optimized C compiler, relocatable
macro assembler, linker, librarian, complete ANSI runtime
libraries, and a fully integrated development environment
under Win98/ME/NT4/2000/XP. |
$3,996.00 |
| IAR/EWARM |
This
package contains an ANSI optimized C compiler, C-SPY simulator,
relocatable macro assembler, linker, librarian, complete
ANSI runtime libraries
and a fully integrated development environment under Win98/ME/NT4/2000/XP.
The add-ons include additional C-SPY debugger engines
interfacing to a variety of hardware evaluation boards
or emulators. |
$4,995.00 |
| IAR/EWARM-PRO |
This
package adds the visualSTATE graphical design tool to
the IAR/EWARM package listed above. |
$5,395.00 |
MicroCross,
Inc.
C/C++ Compiler, Assembler, Linker,
IDE |
|
| MCVXT340DW-ARM |
Visual
X-Tools IDE for Windows w/ GNU X-Tools, ARM/Thumb Toolsite. |
$1,500.00 |
| MCGXT340DW-ARM |
GNU
X-Tools™ v3.40 on Windows host ARM/Thumb Toolsuite.
(no windows GUI) |
$1,000.00 |
|
|
| Micrium,
Inc. |
|
MicroC/OS-II
 |
MicroC/OS-II
RTOS 600 page book by Jean Labrosse, including the latest
version of the RTOS (v2.76 with some minoir improvements
by Nohau). This is essentially a "develoopment license." For use in commercial projects, the license
cost is listed in the following item. ISBN 1-57820-103-9. |
$90.00 |
| MicroC/OS-II-License |
*MicroC/OS-II
RTOS lifetime deployment license for one product. |
$3,300.00 |
|
|
InterNiche
Technologies, Inc.
InterNiche, NicheStack and WebPort are trademarks of InterNiche
Technologies, Inc |
|
|
All
prices listed are for the single product license. Product
line and site product line licenses are available for
each of the listed products. |
| InterNiche/NicheLite |
Communications
protocol: full featured TCP/IP stack, written completely
in C, that is under 12KB. It is designed to be highly
portable and compliant implementations of the TCP/IP protocol
suite. It includes ANSI C sources for the TCP/IP family
of protocols, a "Mini" Sockets API, and full
technical documentation. |
|
| InterNiche/NicheStack
IPv4 |
Communications
protocol: implementation of InterNiche's TCP/IP, designed
for use in embedded applications requiring both IPv4 and
IPv6 protocol support. Enables developers to take advantage
of this next generation Internet Protocol, and supports
IPv6 over IPv4 tunneling to allow routing through traditional
networks. |
|
| InterNiche/uC/OS-II(ChronOS) |
Operating
system component: multitasking,
portable, ROMable, scalable, preemptive, real-time operating
system that is highly scalable and flexible.
This is a uC/OS-II distribution slightly modified
by InterNiche to work with InterNiche's other products. |
|
| InterNiche/FTP
Server+ |
Portable
FTP Server: complete drop-in software module for developers
to add file server functionality to their embedded systems.
FTP allows the embedded systems developer to add sophisticated
file service capabilities. |
|
| InterNiche/HTML
Compiler |
The
optional HTML compiler is a valuable timesaving tool that
produces ready to use C code for linking variables to
forms and dynamic HTML. The HTML compiler compresses standard
HTML and graphics (GIF) files, averaging about a 2:1 compression,
and converts them into C language data arrays and structures
that are compatible with the Virtual File System. The
WebPort server will automatically decompress these files
before downloading. The HTML compiler also produces C
Language sources for stub routines and structures to implement
SSI and CGI routines. |
|
| InterNiche/IP
Auto Discovery |
Auto
IP is a portion of Universal Plug & Play" (UPnP)
specification that allows an embedded Internet device
to acquire an IP address without manual configuration
or a DHCP server. |
|
| InterNiche/MultiLink
PPP |
Multilink
PPP is a standard (RFC1990) for splitting the traffic
of a logical PPP connection over two or more physical
links. This works by dividing each packet into multiple
smaller fragments, one per physical link, and transmitting
the fragments over the links in parallel. This means each
IPCP session must be associated with multiple LCP sessions,
significantly complicating the internal logic of the PPP
code. |
|
| InterNiche/NATRouter |
Specialized
routing software: Internet protocol technology designed
to overcome problems businesses experience with IPv4 networking.
By utilizing private IP addresses, NATRouter saves money
and ensures ease of future network growth by allowing
up to 64,000 devices to access the Internet with a single
IPv4 address. |
|
| InterNiche/PPP |
Complete
SDK: portable PPP stack is for developers of embedded
systems to add point to point protocol functionality to
their InterNiche TCP/IP stack. It includes ANSI C sources
for all standard PPP authentication protocols and DHCP
over PPP. |
|
| InterNiche/PPPoE |
PPPoE
(Point-to-Point Protocol over Ethernet) is a specification
for connecting multiple computer users on an Ethernet
local area network to a remote site through common customer
premise equipment, which is the telephone company's term
for a modem and similar devices. PPPoE can be used to
have an office or building-full of users share a common
Digital Subscriber Line (DSL), cable modem, or wireless
connection to the Internet. PPPoE combines the Point-to-Point
Protocol (PPP), commonly used in dialup connections, with
the Ethernet protocol, which supports multiple users in
a local area network. The PPP protocol information is
encapsulated within an Ethernet frame. |
|
| InterNiche/SNMP
v1 |
Software
development kit: provides an exchange of information among
network components. This complete software development
kit is designed for embedded system developers and is
memory-efficient and highly portable. |
|
| InterNiche/Telnet+
|
Portable
Telnet Server: complete drop-in software module for developers
of embedded systems to add Telnet Server functionality
to their embedded product. |
|
| InterNiche/WebPort |
WWW
Micro-Browser and Server: allows and embedded device to
be configured and monitored by end users with any World
Wide Web browser, eliminating the need for the manufacturer
to provide a variety of GUIs for Windows, UNIX, etc. All
the GUI graphics, controls and text are self contained
in the device's firmware. InterNiche's server starts with
the standard Web server features and enhances them to
address common embedded system issues, such as
lack of a native file system, limited ROM/RAM, and limitations
of the shell which would normally execute CGI requests. |
|
| InterNiche/NicheStack
and WebPort |
Basic
server bundle: includes both the NicheStack and the WebPort
listed above. |
|
| InterNiche/NicheLite
and WebPort |
Basic
server bundle: includes both the NicheLite and the WebPort
listed above. |
|
| +
Included with NicheStack, Rel. 2.0. Support after first
year priced separately. |
|
To purchase these replacement parts, the original parts
must be returned. |
| USB/JTAG
Interface |
|
$300.00 |
| Compact
Trace Module (CTM) |
|
$600.00 |
